Please find your device and manufacturer on this list of setup codes (PDF, 172KB).
Each device (TV, DVD, VCR, etc.) has its own code. Use the following steps to set up the TV, DVD, or AUX mode keys: Other universal control codes for insignia code#
Program by manually entering manufacturer code The appropriate mode key will give a long flash indicating successful programming. Once the buttons are functioning, press the Enter key to save the programming.
If there is a problem with any of the buttons, press the Scan\FF button until the buttons function properly. Press the Rew\Scan button repeatedly and test the Power button again. If the equipment does not turn on, you may have pressed the Scan\FF button too many times.
Press the Power button on the remote to turn the equipment back on. If the equipment does not turn off, and the selected mode button flashes 8 times, please start over at step 1. The selected mode button will flash once for each press of the Scan\FF key. Press the Scan\FF button repeatedly until the equipment turns off, pausing briefly between each button press. The four mode buttons on the remote control will flash twice to indicate you're in programming mode. Hold both buttons for one second, and then release. Press and hold the mode button you want to assign to the equipment (TV, DVD, or AUX) along with the Enter button. Turn on the equipment to be programmed, such as the TV, DVD player, or auxiliary equipment, and point the remote control at the selected equipment. To use the U-verse TV S10 remote control with your TV, DVD, or auxiliary equipment, you'll need to program one or more of the mode buttons (TV, DVD, or AUX) at the top of the remote control, as follows: 
Program using auto code search (recommended)
0 kommentar(er)
